Manual Connection

Follow instructions below to manually enable Wi-Fi on a Yealink phone.

Select the Menu button.

Select Basic Settings,

NOTE: Some Yealink monochrome (black and white) models may have to select Settings first then Basic Settings.

In the Basic Settings scroll down and select Wi-Fi 

Turn the Wi-Fi setting On and Save

Now that phone has Wi-Fi On, scroll down to Available Network(s) and press Enter

NOTE: the number of Available Networks will vary. In example below there are 3 available wireless networks.

Scroll to the wireless network you want to connect to and select Connect

Then, enter the password of the wireless network and select Save

NOTE: to change from Numbers to Letters for Password press the "abc" key, special characters can be found on the * key (star key).

You should see the network connect successfully:

The icon below will indicate that your phone is connected via Wi-Fi.

Configuration Parameters

static.wifi.enable="1"
static.network.pc_port.mode="1"
static.wifi.1.ssid="WIFISSID"
static.wifi.1.security_mode="WPA/WPA2 PSK"
static.wifi.1.password="WIFIPassword"