Pair a DECT Handset To a Base

From the Base

On the W60B/W70B base station, press and hold the signal button for 3 seconds.

The LED indicator for the handset will start flashing.

From the Handset

While the base is flashing, on the handset and from the home screen, press Reg

If the Reg option is not there, you may need to navigate into the settings of the handset.

Settings > Registration > Register Handset > Base 1

You will see the handset register via Easy Pairing once it locates the base unit.

De-Register a Handset

• Press OK to enter the main menu
• Navigate to Settings > Registration > De-reg Handset 
• Enter PIN 0000 when prompted
• Press Yes when prompted to confirm, in order to complete the de-registration

Factory Reset the Handset

• Press OK to enter the main menu
• Navigate to Settings > System Settings > Handset Reset > OK
• You'll be prompted: "Reset handset to default”, press Enter
• Another prompt for the PIN - 0000
• Press Yes to confirm.

Factory Reset the Base From the Handset

• Press OK to enter the main menu
• Select Settings > System Settings > Base Reset
• Enter PIN 0000 and press Done
• Navigate to Reset to Factory and press OK